Inside Outsourcing In India

Outsourcing to India can provide a huge payback -- if you're willing to work at it. Two offshore veterans share their hard-earned lessons to help you determine if Indian outsourcing is right for your company.

Don’t bother trading horror stories about outsourcing to India with John Doucette. He’ll trump you every time. "I was doing this back when you didn’t want to be doing this," says Doucette, CIO of Hartford, Conn.-based United Technologies, who first sent coding work to India more than a decade ago when he worked at General Electric. "Most CIOs don’t have any clue what it used to be like. You had people who couldn’t speak English. The telecommunications were terrible. It was awful trying to transfer files back and forth."

Head down the highway 10 miles to Otis Elevator in Farmington, one of United Technologies’ six business units, and you won’t get much sympathy from offshore veteran David Wood either. "Back then, there was not a lot of capability in India," says Wood, who set up a captive development center in India in the early ’90s when he was CIO of Otis Asia Pacific in Singapore. "It was a phenomenon that was only just starting," adds Wood, now Otis’s director of systems development.

Today, however, Indian outsourcing is one of the best ways for CIOs to cut application development and maintenance costs, deal effectively with the peaks and valleys of software demands, and focus on more strategic work. Depending on whom you ask, anywhere from one-half to two-thirds of all Fortune 500 companies are already outsourcing to India, and, according to Forrester Research, the amount of work done there for U.S. companies is expected to more than double this year. If you’re not already sending some development or maintenance work to Mumbai or Chennai, chances are you’re either looking into it or your CFO, salivating over potential labor cost savings of 70 percent, is wondering why you aren’t.

But despite its popularity, successful outsourcing to India is still difficult. While the market has matured, telecommunications have improved and English fluency in India has flourished, challenges still remain. Cul-tural issues creep in, service-level expectations are set too high, transitional costs can be foreboding, and ongoing relationship management is expensive and labor-intensive. And although United Technologies is an Indian outsourcing success story, to be sure -- the company has already saved $50 million and attributes $30 million annual savings to it -- United has had to overcome some obstacles. Even old hands like Doucette and Wood make missteps, and they agree that outsourcing to India is a work in progress -- a journey, not a destination. But they are still big believers of the India phenomenon. They recently shared with CIO some of the lessons they’ve learned along the way.

Big Changes at a Big Company

For years, $28.2 billion United Technologies Corp., or UTC, acted primarily as a holding company for its subsidiaries -- Carrier, Hamilton Sundstrand, Otis, Pratt & Whitney, Sikorsky Aircraft and UTC Power -- with offices in nearly 180 countries. Each subsidiary had its own enterprise systems, processes for sourcing projects and IT organizational structures. UTC continues to function as a holding company, but it also provides support for its subsidiaries for common business processes such as HR and indirect sourcing. In 2001, Chairman and CEO George David decided it was high time for UTC to reap some benefits from the combined size and power of its companies. He issued a decree that UTC squeeze $500 million out of its annual $3.5 billion direct procurement costs. Doucette, who had just been promoted to CIO of UTC, was responsible for $40 million of the mandated savings.

In addition to doing the more obvious things such as centralizing back-office IT functions and standardizing all locations on certain platforms, Doucette’s experience told him that he could wring a hearty chunk of change out of application costs by sending more work to India. With the help of UTC’s sourcing office in the finance department, Doucette ran the numbers. The office estimated that he could cut $28 million of an annual $125 million spent. The savings would come as UTC began replacing high-priced U.S. contractors with less expensive Indian labor (for a look at UTC’s offshore growth, see "Outsourcing Explodes," right).

UTC’s subsidiaries had begun outsourcing to India long before UTC set up a corporate strategy to support it. In addition to the Pune, India-based development center Wood set up for Otis Asia Pacific in 1995, Otis’s U.S. headquarters began sending projects to Bangalore-based Wipro Technologies four years ago when Doucette was CIO of that division. "It wasn’t cost-driven at the time. It was just to get the work done," Doucette explains. But two years later, he decided it was time to develop an overarching strategy and process for sending software work to India.

First he revisited the decision to make India his country of choice. New players such as Russia and China had joined the IT services game, and Doucette gave them a look. Ultimately, however, he decided India was still the best choice because of the maturity of the software companies operating there. "It’s taken India 10 years to get to where they are," Doucette says.

Vetting the Indian Vendors

Then it was time to start crunching some serious numbers. In order to help UTC’s divisions buy in to the idea of outsourcing to India and leverage the conglomerate’s scale, Doucette thought it best to create a list of preferred vendors and negotiate prices up front. With part-time help from three employees in UTC’s sourcing office, he issued RFQs (what UTC calls RFPs) on the three main areas of work UTC would need done: mainframe, e-commerce and ERP programming. The company received bids from 43 vendors via an automated online system called FreeMarkets -- basically an eBay for corporate procurement in which UTC holds a stake. From there, the sourcing team began whittling down the list based not only on bid prices (Doucette ruled out the five lowest bidders), but on 500 discrete criteria in the areas of service offerings and capabilities, price, management practices and procedures, customer base, and business profile and strategy. Holding a giant spreadsheet, Doucette explains how the sourcing staff scored each vendor from one to five on each criterion, giving more weight to service offerings and price than to other, less important criteria such as business strategy and customer base.

The sourcing folks informed their scoring not only with their own experience but with input from those at UTC already doing offshore outsourcing, visits to the companies and interviews with customers. The sourcing staff trimmed the list down to 20, and then Doucette and the other UTC business unit CIOs settled on five preferred providers -- Wipro Technologies, Mumbai-based Tata Consultancy Services (TCS), HCL Perot Systems (HPS) and HCL Infosystems (both based in Noida), and ITC Infotech India in Calcutta. Such a strategy is common. "More than 70 percent of companies going to India are putting together lists of two or three vendors to work with," says Dean Davison, vice president of service management strategies with Meta Group.

Finally, Doucette signed contracts with the five companies, creating fixed prices for development and maintenance work for all UTC divisions. The entire process took about three months.

What Stays and What Goes

The vetting process was only the beginning. Doucette also had to create an overarching strategy for outsourcing to India. Taking the time to make such a strategy clear is something novice CIOs might skip, but that would be a mistake. "There’s much more to going offshore than sending out an RFP, selecting a vendor and doing it," says Marty McCaffrey, executive director of Software Outsourcing Research. "You have to go to extraordinary lengths to establish goals and objectives first."

Doucette created a sourcing plan stating what goes offshore, what goes to U.S. outsourcers and what stays at UTC. His criteria for what goes where are pretty simple. "First, you have to ask yourself if the work is strategic. If the answer is yes, you should keep it internal," Doucette says. "Then, if it’s not strategic, you have to ask yourself if it’s going to the lowest-cost source. If you’re not the lowest-cost provider of that service, you need to contract it out."

The result of that analysis: Doucette and his divisional CIOs send all help desk, network, desktop, midrange, mainframe and Web-hosting work to Computer Sciences Corp., and have a goal of sending 80 percent of all application development and support to India. That means UTC and its subsidiaries keep in-house IT leadership, project management, business analysis, and (eventually) 20 percent of application development and support. Keeping a certain number of skilled developers in-house ensures that UTC and its divisions don’t get overcharged by an outsourcer. "When I was at Otis," Doucette says, "we put out an RFQ for an e-commerce project, and we got bids ranging from $60,000 to $3 million. If you don’t have someone in your operation who knows how much that should cost, then how can you outsource it?"

It’s a mistake many CIOs make. "One way to circumvent that is to have multiple vendors continually bidding against each other," Meta Group’s Davison says. "Another way is to keep people in-house who are really smart about those things."

In setting standards for what should go to India and what should stay, Doucette also took into account that UTC’s six subsidiaries have very different structures and needs. Companies such as Otis, with most of their IT departments centrally located at headquarters, were good candidates to go offshore. Carrier, however, was not. It has 49 manufacturing plants scattered across the United States with a handful of IT people located at each one. "When creating an offshore model, you really need to look at your own business model and where your IT staff is, and customize it based on that," explains Doucette.

Another issue Doucette had to consider was the companies’ security needs. While security is clearly a priority for every UTC company (it uses secure private networks, stores most code stateside and uses software that limits offshore network access), UTC simply cannot put any military-related work offshore. Pratt & Whitney, Hamilton Sundstrand and Sikorsky Aircraft all do government work, which accounts for 16 percent of UTC’s combined revenue. "We have to split up military and commercial work and be careful about what we give them access to," Doucette says. "It’s a struggle because we’re trying to work together as much as we can to save money. For example, if Pratt & Whitney and Carrier are in the same building, they share a network. But that means I can’t put that network support in India even though I’d like to."

Otis Sets Up a Dedicated Offshore Center

While Doucette makes overarching strategy decisions and handles some vendor relation issues on a macro level from his penthouse office on the 26th floor at UTC headquarters, the day-to-day management occurs at the individual business level. At Otis, that task falls to Wood, sitting in his office amid a cluster of Otis buildings off I-84.

Though Otis was sending work to Wipro before Wood transferred from Otis Asia Pacific in 2001, Wood has made significant changes to the relationship during the past two years. The biggest change: moving from a project-by-project service delivery model to having Wipro set up a dedicated offshore development and maintenance center for Otis (for a closer look at dedicated centers, see "The Hottest Trend in Outsourcing Management," Page 68).

"When I showed up here, Otis’s experience outsourcing to Wipro was in full swing, but it was not mature," Wood explains. Otis would have a specific project and requirements; Wipro would come in and provide a proposal and a quote. If accepted, the outsourcer would do the project with roughly one-quarter to one-half of its people offshore and deliver it to Otis. Otis retained Wipro’s personnel for what Wood calls a 30- to 60-day "warranty" period, after which they would disappear until a new project came along or modifications had to be made. Otis was saving $500,000 a year over doing the work internally, but this model was becoming burdensome. "It’s a cost-effective model for doing a single project, but when you build up a portfolio of applications, it’s very inefficient," Wood says.

In 2001, Otis had a total of 30 applications, and the old model wasn’t working. Wood proposed that Otis and Wipro transition to the dedicated center model, where Wipro would assemble a permanent team in Bangalore to work on nothing but Otis projects. "It’s basically a standing army of resources provided by the vendor that addresses all of your application needs," Wood explains.

"The benefit is that people assigned to the project feel more attuned to the company, so turnover rates are lower," says McCaffrey of Software Outsourcing Research. "And those vendor personnel are acquiring long-term knowledge about your systems, so you have a more productive worker."

Related:
1 2 Page 1
NEW! Download the State of the CIO 2017 report