Automated incident response promises total network security by combining threat detection, prevention and response.
Automated incident response is one of the fastest growing fields in computer security. Alternatively called threat monitoring, vulnerability management or threat management, it encompasses the seemingly impossible task of defending a network from active threats as they happen, in addition to detecting every possible vulnerability that could be exploited by an attacker.
As such, you don’t see tons of companies jumping into this area. But several companies have come out with automated incident response products and three of the leading vendors accepted our invitation for a comparative review -- Tenable Network Security SecurityCenter, Hewlett Packard WebInspect and Co3 Systems Security Module.
+ ALSO ON NETWORK WORLD: FIREEYE FIGHTS OFF MULTISTAGE MALWARE +
Since vendors typically have their roots in one of those three areas -- detection, prevention or automated response -- their approaches are influenced by that starting point, leading to slightly different methods to achieve the goal of total network security. This means we needed to look at how effective the tools were overall, since there are few other metrics that can be compared side by side.
For this review, all programs were installed and tested with a variety of client machines and servers in a moderately sized test bed. Because the tested programs are all designed to work with hundreds and thousands of systems, no attempt to test scan performance was made, though program features designed to speed up scans were noted.
Each program was evaluated on ease of installation, features, ease of use, and automation level – whether the program actually helped make patching the holes easier or simply pointed out what to do without any tracking or recommendations. In a sense, automation level could also be considered how complete the package is, now that all three elements of detection, prevention and response are combined together.
As a meshed, mature and easy to use product, Tenable SecurityCenter scored the highest of the three products in this review. It was able to provide true continuous monitoring for networks of any size and used customized dashboards to show the most relevant information concerning security to those who need to know. It's almost impossible to conceive of a successful attack occurring on a network that is so well guarded by SecurityCenter, where every PC, device and connection is constantly monitored for malicious or abnormal behavior.
HP WebInspect, by comparison, requires a little more elbow grease to get the job done, but might be perfect for organizations that like to take a more active approach to their security precautions. It uses the concept of having to think like a criminal to catch one and launches thousands of real but benign attacks against a network, silently recording which ones are successful. Network administrators can then plug real holes and use WebInspect to check their results. WebInspect will reveal the ugly truths about security on any network, but requires security professionals to roll up their sleeves to fix individual problems.
The Co3 Security Module is the strongest in this review when it comes to the response side of the equation. While the Co3 product is only just getting into the areas of helping to fix problems, it can illuminate a perfect and legally sound response to any incident. Given that most organizations fail at their response to attacks – not notifying users, not bringing in the proper state or national authorities or not meeting their legally mandated responsibilities – the Co3 Security Module is a good choice regardless of what program is actually guarding the gates.
Here are the individual reviews:
Tenable Network Security SecurityCenter
The SecurityCenter program from Tenable hits all three areas of detection, prevention and automated response as the most complete package in this review. It's simply the best in every tested area.
It achieves this feat by first inventorying every system on a network and giving administrators a complete view of everything that is running and how everything interrelates. For example, looking at the results of a scan, you can immediately tell how many systems on any given network have anti-virus programs installed, and which ones are up to date. It also shows the number of firewalls that are deployed, and what systems are actually being protected by which ones. This complete network picture can help to knock out the lowest hanging fruit type of problems, like systems outside of a network firewall or old antivirus definitions.
It can also identify devices and clients that may no longer serve a function, like an old print server or a network switch that used to be important but which is no longer used. If those devices have not been removed and decommissioned, they can still provide an attack path for a clever or lucky hacker. And almost every large enterprise network is going to have at least a few.
SecurityCenter was even able to find an old PC we stuck at the very edge of the test network, sitting behind a switch and three hubs, which had no function or active network connectivity. And it discovered a PlayStation 4 which was connected to the test network through a wireless connection that was accidentally not disabled prior to the test.
Once that is in place, SecurityCenter can be used to find variances that stick out, and it can get very granular in this part of the examination. Systems that have configurations outside of the default pattern or which are using more of their CPU than others performing similar tasks can be flagged for follow-up even before the main features of the program are brought online. Although not specifically designed as a network auditing or diagramming tool, SecurityCenter does a fine job providing this as the baseline the rest of the system is built upon.
Once everything in a network has been discovered, SecurityCenter can enter continuous monitoring mode. It does this using a process of scanning, sniffing and logging while also looking for any indicators of compromise. For example, an Android phone that we purposely infected with rudimentary homegrown malware was detected based on its behavior alone, because the device was attempting to make queries into a protected database. Threat intelligence is also brought into the program from other vendors, so known botnets and common attacks are immediately found and identified. And because SecurityCenter first found all devices on a network, even older, forgotten or previously unknown computers will be protected.
SecurityCenter works by combining threat intelligence with network sniffing and passive scanning. It does not conduct full packet inspections of all traffic running through a network, nor does it decrypt SSL packets. Doing so would certainly increase the scan time by a large margin, and in our testing, SecurityCenter was able to stop every attack based on the behavior of the protected devices alone. That said, some very highly secure organizations may insist on deep packet inspections, which SecurityCenter doesn't offer.
Once an incident is detected, the response is quick and configurable based on what an administrator pre-programs, based on severity, device type or anything else. Emails can be sent to the appropriate people, deeper scans of suspect devices can be initiated, trouble tickets can be opened and log files can be written to name just a few possibilities. There are a lot of configuration options so that, for example, something minor like a new vulnerability being detected might warrant a low priority response while a critical problem like an ongoing attack could literally raise the alarm.
The icing on the cake for SecurityCenter is the easy-to-use security dashboards, which can be configured to show exactly what an administrator needs to know at a glance.
Dashboards can be set to show, for example, how many devices on a network comply with special regulations like HIPAA. Dashboards can be as complex as bringing up a list of vulnerabilities for compromised systems, or as simple as a big red light that illuminates should a critical problem be detected. SecurityCenter has quite a few out-of-the-box dashboards that should work for almost any installation, and either Tenable or a trained administrator can make custom ones, if needed.
HP keeps a pretty tight lid on who can use HP WebInspect and how it can be deployed. And that's a good thing because in the wrong hands, WebInspect would be a very dangerous weapon. For this review, we had to specify the IP range that was being scanned and the license would not allow us to ping anything outside of that zone. HP says companies that purchase the program would be under the same constraints, but that it's possible to modify the license after the fact by letting HP know how it should be expanded.
The reason for all the tight security is that WebInspect launches actual attacks, over 3,300 of them, against all known vulnerabilities across an entire network. A team at HP is constantly updating the number and type of attacks the program launches so that all the latest vulnerabilities can be found. Although this relies on active scanning, it's relatively quick when dealing with a moderate number of clients and devices, though it might take days in massive enterprise settings.
Pointing it at a fake online bank with 800 devices that HP set up for the test took about a minute. Our much smaller local testbed was scanned in just a few seconds. The speed of the scans is also somewhat dependent on the hardware that WebInspect is installed upon. We used a workstation class computer as our base, but a large enterprise user will likely want to have a server or appliance just dedicated to the scanning.
The attacks that WebInspect launches are benign. They don't do anything malicious. But they record when they get through, showing that they could have caused mayhem at some level had they been equipped with a dangerous payload. The value for security administrators is that WebInspect shows the attack used, the path the program took to reach its destination and the vulnerabilities that were exploited. Looking at the scan results, one can easily see why the program could be dangerous in the wrong hands, as it would provide multiple road maps showing how to successfully attack any network.
The idea is that security personnel can take the successful attack data and go to the exact systems that were successfully attacked to fix the hole. Then they can trigger WebInspect to again launch just the specific attack they have tried to fix to confirm that it's no longer a vulnerability. One by one, each attack path or vulnerability is thus eliminated until an entire network is cleared of all vulnerabilities. The program then continuously scans the network on a regular basis to look for new threats based on the latest attacks, or as new devices come online, making it a core component to any automated incident response routine.
The base WebInspect program is incredibly powerful, but to get the full value of the program requires another element, HP WebInspect Agent, be installed on scanned devices. The latest version of the Agent program is free to WebInspect users, but it needs to be installed on every individual device to get the added protection it offers.
Agent works by enhancing the information provided by WebInspect attacks. The biggest vulnerability that was found with Agent added to the mix was cross-scripting errors which could allow an attacker to inject their own code into web servers. Only with Agent running on the backend could we initiate a stack trace to find this vulnerability, since the Agent acts like an inside man, showing exactly what is going on inside the protected host system. Another advantage to using Agent is that attacks like SQL injections are better defined with path information and specific attack strings. While WebInspect can report that a server is vulnerable to those types of attacks, only with Agent does the exact database attack query come to light.
Agent can also find web pages that don't link anywhere and have likely been abandoned or forgotten, yet are still part of the enterprise and will still display if someone types their addresses directly. Those pages could be a vulnerability as long as they are still active, yet in most large websites there are at least a few that slip past content designers over the years. As such, Agent should probably be installed on any public-facing devices at the very least, especially those tasked with displaying web content.
Although WebInspect requires a little bit more technical knowledge than some programs, the ability to launch actual attacks as part of an automated threat response system can't be overstated. Organizations that need to know the hows and whys of attacks directed against them should consider the program despite the extra effort installing it and its companion Agent program entails.
Sponsored by Dell Software
Mapping Out the 5 Key Components of an Enterprise Mobility Strategy
Apple's new iPhones are similar in many ways, but if you're considering an iPhone 6 or iPhone 6 Plus
The breakneck pace of change in the IT industry is forcing you to change the way you think about
Offerings in the advanced analytics space are rapidly evolving to meet the changing needs of
Sponsored by Cisco
Sponsored by Dimension Data
Sponsored by IBM
Sponsored by join.me by LogMeIn
Live tweeting by cast members and official accounts for TV shows is lifting the reach and engagement of
Following a recent European ruling to let passengers access wireless networks throughout flights, a
If you buy a gigantic phone, pack it into a pair of skinny jeans, sit on it for 18 hours and find that
Sitting on a corporate board is a great way for CIOs to gain exposure, new professional experience and