• White Papers |
• Bloggers |
• Video |
• Webcasts |
• Events |
• Solution Centers |
• Newsletters |
• Magazine |
• RSS

How to Protect your Wireless Network

Preston Gralla provides step-by-step instructions for Wi-Fi.

By Preston Gralla

September 25, 2007 — Computerworld — Bad guys don't target just big, corporate networks. If you have a Wi-Fi network at home or in a small office, intruders may be after you, such as casual "war drivers" who troll city streets, looking for unprotected wireless networks. (Want to know more? See "Why you need wireless protection.")

It may not just be malicious attackers who cause problems. If you don't change the defaults of your wireless network, a neighbor with the same router make and model might accidentally connect to your network, stealing your bandwidth or reconfiguring your router and network without your knowledge.

Fear not, though. There's plenty you can do to protect yourself. In this article, I'll show you how.

Change your administrator password

Before you do anything else, change the administrator password on your router. Every model of router comes preconfigured with a standard password, and hackers know this. So it's exceedingly easy for someone to hop onto your network, gain full control over its administrative rights and wreak havoc.

How you change your password varies from router to router, so I'll show the steps for a representative model: the Linksys WRT54GX4.

1. Log in to the setup screen by opening your browser and going to http://192.168.1.1. When the login screen appears, leave the username blank. In the password section type admin, and then press Enter.

2. Click the Administration link, then click Management. At the top of the page, you'll see the Router Password area. Type a password into the Router Password box, then retype it in the "Re-enter to confirm" box. From now on, when you log in, use that password instead of admin when you log in to your router.

Stop broadcasting your network's SSID—and change its name

Your service set identifier (SSID) is your network's name, and if people know what your SSID is, it's easier for them to find your network and connect to it. Your router broadcasts its SSID, and that broadcast tells passersby there's a network there. It also gives out the name.

So, if you turn off SSID broadcasting, you'll go partway toward keeping casual users from seeing your network. But doing that, by itself, won't necessarily solve the problem. Even if you stop broadcasting your network's name, people might still be able to connect to your network. That's because manufacturers generally ship their wireless routers with the same generic SSID; for example, Linksys routers all have the SSID Linksys by default. So, even if you stop broadcasting your SSID, intruders can easily guess your router's name and log on.

 

Email

Print

Comments

Share [+]

Digg This

SlashDot

LinkedIn